Q: Show me/explain how you would check that the power-assisted steering is working before starting a journey.
A: If the steering becomes heavy the system may not be working properly. Before starting a journey two simple checks can be made. Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate.
Alternatively, turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.
Q: Show me how you would check that the headlights and tail lights are working.
A: Operate switch (turn on ignition if necessary), walk round vehicle.
Q: Show me how you would check that the direction indicators are working.
A: Applying the indicators or hazard warning switch and walking around the vehicle to check functioning of all indicators.
Q: Show me how you would check that the horn is working (off-road only).
A: Check is carried out by using the control (turn on ignition if necessary).
Q: Show me how you would check the parking brake for excessive wear.
A: Demonstrate by applying parking brake that when it is fully applied it secures itself, and is not at the end of the working travel
Q : Show me how you would clean the windscreen
using the windscreen washer and wiper
A:
Operate control to wash and wipe windscreen (turn
ignition on if necessary.
Q:
Show me how you would set the demister controls
to clear all the windows effectively, this should
include both front and rear screens
A: Set all relevant controls including; fan, temperature,
air direction / source and heated screen to clear
windscreen and windows. Engine does not have to
be started for this demonstration
Q:
Show me how you would switch on the rear fog
light(s) and explain when you would use it/them.
(No need to exit vehicle)
A: Operate switch (turn on dipped headlights and
ignition if necessary). Check warning light is on.
Explain use
Q: Show me how you would check that the brake
lights are working on this car. (I can assist you, if
you need to switch the ignition on, please don't
start the engine)
A:
Operate brake pedal, make use of reflections in
windows, garage doors, etc, or ask someone to
help. (may need to switch ignition on, prompt not to
start engine)
Q: Show me how you switch your headlight from
dipped to main beam and explain how you would
know the main beam is on whilst inside the car
A: Operate switch (with ignition or engine on if
necessary), check with main beam warning light